The College of Engineering and Computer Science offers graduate programs leading to Master of
Science and Doctor of Philosophy degrees. Each department within the college offers options for
specialized education.
Dean: M. P. Wanielista, Ph.D., P.E.
Associate Dean for Research: D. R. Reinhart, Ph.D., P.E.
Associate Dean of Engineering: E. Gelenbe, Ph.D.
Assistant Dean for Academic Affairs: J. Nayfeh, Ph.D.
Assistant Dean for Graduate Studies: I. Batarseh, Ph.D., P.E.
The College of Engineering and Computer Science has the following departments with graduate
programs:
- Civil and Environmental Engineering
- School of Electrical Engineering and Computer Science
- Industrial Engineering and Management Systems
- Mechanical, Materials, and Aerospace Engineering
Master of Science (M.S.)
Computer Science
Engineering Management Track
Environmental Engineering Sciences Track
Human Engineering/Ergonomics Track
Interactive Simulation and Training Systems Track
Manufacturing Engineering Track
Operations Research Track
Quality Engineering Track
Simulation Modeling and Analysis Track
Structures and Foundations Engineering Track
Transportation Systems Engineering Track
Water Resources Engineering Track
Master of Science in Aerospace Engineering (M.S.A.E.)
Space Systems Design and Engineering Track
Thermofluid Aerodynamic Systems Design and Engineering Track
Master of Science in Civil Engineering (M.S.C.E.)
Structural and Geotechnical Engineering Track
Transportation Engineering Track
Water Resources Engineering Track
Master of Science in Computer Engineering (M.S.Cp.E.)
Computer Architecture Track
Digital Systems Track
Knowledge-based Systems Track
Software Engineering Track
Master of Science in Electrical Engineering (M.S.E.E.)
Communications Track
Controls/Power Track
Digital Signal Processing Track
Electromagnetics Track
Electronics Track
Electro-optics Track
Solid State and Microelectronics Track
Master of Science in Environmental Engineering (M.S.Env.E.)
Master of Science in Industrial Engineering (M.S.I.E.)
Master of Science in Materials Science and Engineering (M.S.M.S.E.)
Master of Science in Mechanical Engineering (M.S.M.E.)
Computer-aided Mechanical Engineering Track
Mechanical Systems Track
Professional Track
Thermo-fluids Track
Doctor of Philosophy
Civil Engineering
Computer Engineering
Computer Science
Electrical Engineering
Environmental Engineering
Industrial Engineering
Materials Science and Engineering, pending SUS Board of Regents approval
Mechanical Engineering
Graduate Certificates
Civil Engineering
Geotechnical Engineering and Construction Materials
Structural Engineering
Surface Water Modeling
Transportation Engineering
Computer Engineering
Software Engineering
Software-Intensive Systems
Electrical Engineering
Antennas and Propagation
Communications Systems
Digital Signal Processing
Electronic Circuits
Environmental Engineering
Air Pollution Control
Drinking Water Treatment
Hazardous Waste Management
Hazardous Waste Site Remediation
Wastewater Treatment
Industrial Engineering and Management Systems
Applied Operations Research
Design for Usability
Industrial Ergonomics and Safety
Project Engineering
Quality Assurance
Systems Simulation for Engineers
Training Simulation
Mechanical, Materials, and Aerospace Engineering
CAD/CAM Technology
Computational Methods in Mechanics
HVAC Engineering
Launch/Spacecraft Vehicle Processing
Materials Characterization
Materials Failure Analysis
In addition to meeting the minimum university admission requirements (see “University Graduate
Regulations”), each applicant is required to satisfy college and department admission requirements.
Specific department requirements are listed in respective departmental sections. Meeting the
minimum admissions requirements does not automatically guarantee admission, since enrollments may
be restricted by limited college or department resources. Supplemental information such as research
statements, resumes, work or internship experience may be considered by the graduate program
coordinators in making admissions decisions.
College Application Deadlines
| |
U.S. & Resident Alien Applicants |
International Applicants |
| Fall admission |
July 15 |
March 1 |
| Spring admission |
December 1 |
August 1 |
| Summer admission |
April 15 |
December 1 |
Master’s Programs Admission Requirements
- A minimum GPA of 3.0 or better during the last two years (60 hours) of attempted
undergraduate degree work or a score of at least 1000 on the combined verbal and quantitative
sections of the GRE.
- Applicants for master’s programs must have bachelor’s degrees and must present
baccalaureate degree credentials appropriate to the specialized area of study including
mathematics through differential equations. Applicants for the Engineering Management and the
Human Engineering/Ergonomic programs are required to have completed mathematics through
Calculus with Analytic Geometry III (MAC 2313).
- International students, except those who are from countries where English is the only
official language or those who have earned a degree from an accredited American college or
university, are required to submit a score of at least 220 (computer-based test; or equivalent
score on the paper-based test) on the Test of English as a Foreign Language.
Doctoral Programs Admission Requirements
- Each applicant is expected to have a master’s degree in engineering (or related discipline)
awarded by a recognized institution and meet the departmental admission requirements. The
applicant must successfully complete a Ph.D. Qualifying Examination conducted by the department.
A student is normally given only one opportunity to pass the examination, but a second attempt
may be approved by the department. The examination is normally taken within the first year of
study beyond the master’s degree.
- On the decision of the department’s graduate admissions committee, selected outstanding
applicants may be considered for direct entrance to the doctoral program from the bachelor’s
degree. Students selected for this must meet and exceed all master’s program admission
requirements. These applicants must successfully complete the Ph.D. Qualifying Examination by
the term in which they complete the thirtieth hour of graduate course work.
- International students, except those who are from countries where English is the only
official language or those who have earned a degree from an accredited American college or
university, are required to submit a score of at least 220 (computer-based test; or equivalent
score on the paper-based test) on the Test of English as a Foreign Language (TOEFL).
Thesis Option, Master’s Degree Requirements
- A minimum of thirty semester hours of approved course work including six hours of thesis
credits is required.
- No more than six hours of thesis credits will be applied toward degree requirements.
- Continuing enrollment in one hour of thesis once six hours of thesis credits have been
taken and all course work has been satisfied and until the final thesis has been received by
the Office of Graduate Studies (AD 230).
- At least 15 credit hours must be from 6000-level courses.
- A maximum of 9 semester hours of graduate credit may be transferred into the program from
UCF non-degree-seeking status or regionally accredited institutions. Only grades of “B” or
better can be transferred.
- A maximum of 6 credits of 4000-level courses may be applied toward a master’s degree. No
3000-level courses are acceptable.
- A maximum of 6 semester hours of Independent Study may be used toward the degree. Directed
research credits may not be applied toward the degree.
- A minimum “B” average must be maintained in the program of study and no more than two “C”
grades are allowed.
- A written thesis and final oral defense are required.
Master’s Thesis Committee
- The Dean, through the Chairs, is responsible for committee formation, additions, and
deletions. The thesis committee will consist of a minimum of three members. All committee
members should hold a doctoral degree and be in fields related to the thesis topic. At least
two members must be department faculty (one to serve as chair). Off-campus experts, joint
faculty members, adjunct faculty, and other university faculty members may serve as the third
person in the committee. Program areas may further specify additional committee membership. The
Office of Graduate Studies reserves the right to review appointments to advisory committees,
place a representative on any advisory committee, or appoint a co-adviser.
- In unusual cases, with approval from the department Chair, two professors may chair the
committee jointly. Joint faculty members may serve as committee chairs, but off-campus experts
and adjunct faculty may not serve as committee chairs. Particular programs may have more
stringent requirements.
- All members vote on acceptance or rejection of the thesis proposal and the final thesis.
The thesis proposal and final thesis must be approved by a majority of the advisory committee.
Non-Thesis Option, Master’s Degree Requirements
Most departments within the College of Engineering and Computer Science offer a 36 semester hour,
non-thesis option intended primarily for part-time students. The program requirements are the same
as for the thesis option except that the thesis requirement is replaced by 12 credit hours of
course work. An end-of-program comprehensive examination, oral or written, is required.
Doctoral Degree Requirements
- A minimum of 81 semester hours beyond the baccalaureate degree, including 24 semester hours
of dissertation credits, are required.
- Continuing enrollment of three credit hours in XXX 7980 once the course work requirements
and minimum hours of dissertation (XXX 7980) are satisfied.
- At least 6 semester hours of course work taken at UCF outside the department and no more
than a combined total of 12 hours of independent study and/or directed research may be used to
satisfy degree requirements.
- Up to 36 semester hours of credit, including a maximum of 6 credits of thesis, may be
transferred into the doctoral program. The transfer credits will consist of a maximum of 6
hours of 4000-level work, no 3000-level courses, and no courses with grades less than B.
- A written dissertation and final oral defense are required.
Doctoral Dissertation Committee
- The Dean, through the Chairs, is responsible for committee formation, additions, and
deletions. The doctoral committee will consist of a minimum of five members. All committee
members should hold a doctoral degree and be in fields related to the dissertation topic. At
least three members must be department faculty (one to serve as chair), one must be from
another department in the College of Engineering and Computer Science, and one must be from
outside the college. Joint faculty members may serve as department-faculty committee members.
Adjunct faculty and off-campus experts may serve as the outside-the-college person in the
committee. Program areas may further specify additional committee membership. The Office of
Graduate Studies reserves the right to review appointments to advisory committees, place a
representative on any advisory committee, or appoint a co-adviser.
- In unusual cases, with approval from the department Chair, two professors may chair the
committee jointly. Joint faculty members may serve as committee chairs, but off-campus experts
and adjunct faculty may not serve as committee chairs. Particular programs may have more
stringent requirements.
- All members vote on acceptance or rejection of the dissertation proposal and the final
dissertation. The dissertation proposal and final dissertation must be approved by a majority
of the advisory committee.
Integrated BS/MS Program
Some College of Engineering and Computer Science departments offer an integrated BS/MS degree
program that allows students of high academic standing to complete an MS degree at an accelerated
pace. The generic rule for students in this program is that they will be allowed to use nine hours
of intermediate level (5000-level) graduate courses with a grade of “B” or higher toward
fulfillment of both the BS and MS degree requirements. Interested students should contact the
department Assistant Chair or Graduate Coordinator if they have questions about this program.
FEEDS is a Florida statewide system whereby graduate-level engineering and computer science courses
are delivered via video tape to cooperating university centers and selected industrial sites. Most
graduate courses offered each semester are available through FEEDS. A student taking courses
through FEEDS must meet the same requirements as a student on campus and will earn the same credit
as if attending on campus. Courses delivered by the system may contribute to graduate degrees in
engineering.
An off-campus student in industry need not be enrolled in a graduate degree program in order to
take a FEEDS course; however, a student who intends to seek admission to a graduate program should
be aware that no more than 9 credit hours of courses may be transferred from non-degree-seeking
status into a degree-seeking program. Certain courses may have the requirement that the student
come to the main campus for exams or laboratory participation.
For information concerning FEEDS, consult the UCF-FEEDS catalog (published each semester) or
contact the Director of UCF-FEEDS at (407) 823-2481.
|